This laptop was trying to melt to death... here's how I fixed it.

2021 2 ژانویه
393 571 بازدید

Check out the Viewsonic Elite XG270QG at bit.ly/Jayz-XG270QG
Get your JayzTwoCents Merch Here! - www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: facebook.com/jayztwocents
Twitter: twitter.com/jayztwocents
Instagram: instagram.com/jayztwocents#
SUBSCRIBE! bit.ly/sub2JayzTwoCents

نظر
  • i tryed to reaply paste on a laptop and it didnt drop much in temp. then i swapped the thermal paste for a thermal pad and then it worked. i think there must be a to big gap for thermal paste compared to a pad

    Asbjørn OlsenAsbjørn Olsenپیش 2 روز
  • Here is how I fixed it: First I screwed up the thermal paste, then I made the paste better!!! YAY!!!

    Tommy MetzTommy Metzپیش 11 روز
  • I have the NH58AF Clevo and its the exact same one but with a 3900X. I'm getting over 100 degrees c and it shuts down by itself, maximum fan speed doesnt enable once high temps and on average Im getting 65-88c on a normal day just browsing the web

    W MW Mپیش 20 روز
  • really good to know what a difference good and bad paste can make

    Benjamin SuttonBenjamin Suttonپیش 21 روز
  • Dont buy Viotek

    shotarcherZshotarcherZپیش 25 روز
  • I'm surprised it wasn't thermal throttling

    SMUDGEDYTSMUDGEDYTپیش 27 روز
  • This is normal laptop behavior, laptops just heat up because of tiny heat sinks and only exhaust fans

    Gaming YorkGaming Yorkپیش 27 روز
  • What is that fan speed and temperature app called

    Mason StranoMason Stranoپیش ماه
  • I am going to do this on my old MSi GX740 Laptop. It was a souped up model from Novatech about 11 years ago, not hammered it spent quite a lot of time in a cupboard so still looks like new, but temps are not as they should be.

    Steven HartSteven Hartپیش ماه
  • Mine DID melt to death... :(

    GamersRiseGamersRiseپیش ماه
  • I thought that's just what laptops did. When one turns into a puddle, you get another one.

    IcantSignInIcantSignInپیش ماه
  • What software are you using to see temps and fan speed?

    J. José Rivera TorresJ. José Rivera Torresپیش ماه
  • I have a question. Is 83 degrees F ok for the Geforce 1080 desktop? I havent seen it go higher than this.

    Scott NorrisScott Norrisپیش ماه
  • Who knows what brand thermal paste that jay using

    thommy zawathommy zawaپیش ماه
  • I've been having the same issue with my GS65 Stealth! I always run it on cooler boost (8000+ RPM on all three fans). There is nothing that I'm able to do about it! At idle it's at 50-60°c🔥. Rarely it stays at 40-50°c. But the GPU stays cool even under loads (at 70°c) but CPU runs hot 😬 and any state and reaches 95°c if I launch any game, doesn't matter how demanding it is, down clocks itself to 2.6 GHz all cores and yet stays at 95°c. (Sad face) I'm not able to game at all! I've an active undervolt(-144.5 mV cache and core) and locked all cores at 3.0 GHz, this helps a bit and drops the temps to around 80°c. IG re-paste is my only option left! My laptop performs so bad with or without undervolt, and can't even push 60 fps in Valorant. But have seen it work great in synthetic benchmarks like Cinebench R20 with a highest multi core score around 2800 with hours of tuning the undervolt and at stable settings it hits 2000+ IG, without undervolt it hits 1750. I've re-installed all the drivers just to be certain that it isn't software related issue, have tried both the latest and the stock version to compare results, and both end up with the same outcome, so that's that!

    Hariharaa N SHariharaa N Sپیش ماه
  • Stop saying "see" you tool, it's pronounced Celsius. You don't say "eff"

    hmmmmm2555hmmmmm2555پیش ماه
  • I have the same laptop from Metabox Australia but with the 3900X over the past week it idles at 70-75c, and if Im either video editing or playing a game I reach 95-103c and my fans doesn't automatically max out when it reaches these temps, I have to open that same ControlCenter 3.0 that comes with the Clevos and manually set it to Maximum. Think I may do the same as you did on this

    W MW Mپیش ماه
  • make sure you people do thermal paste job properly so it can stay nice and cool😉😉👍👍😀😀😀😁😁😁

    John-Paul TolczykJohn-Paul Tolczykپیش ماه
  • Jay, after watching the video I ordered some of this cooling paste and damm King Pin has an awesome cooling paste you made me a believer, my temps on my PowerSpec 520 laptop from Micro Center dropped from an average 100c on the CPU to an average of 68c, many Thanks to King Pin for his excellent cooling paste.

    Jesse6749Jesse6749پیش ماه
  • ‘Insert hate comment’

    Marshall BlantonMarshall Blantonپیش ماه
  • "Power saving will bring the temperatures down as you might expect." * Temperature jumps up 61 to 68

    Ryuujin1024Ryuujin1024پیش ماه
  • That thing would be much nicer, with a 3700x in it. Probably hit higher clocks, as its only a 65w cpu.

    Robert FrischRobert Frischپیش ماه
  • just one question: is there any new info on the rtx3000 issues? the capacitor stuff and that?

    Mirko1891Mirko1891پیش ماه
  • For my Razer Blade 15 I put on liquid metal and that helped drop the temps down 26c. Opening web page it would spike up to 80c now stays about 48 idle and 62 when watching videos.

    Wayne TetreaultWayne Tetreaultپیش ماه
  • I had this problem with my PS4 Pro. I was playing Doom 2016 and the fan was so loud it sounded like a hair dryer but the air coming out the back wasn't all that hot. It was basically dry out of the factory, I have no idea how it took so long to present a problem (maybe because I don't play PS4 all that much) but I used some basic Corsair TM30 (it's all I had on hand) and now the noise is much lower and the air coming out of the unit is actually hot. Crazy how much difference fresh paste makes.

    Evil ChameleonEvil Chameleonپیش ماه
  • Then there’s my laptop that reaches almost 90 degrees just opening internet

    Ghxst PoGGhxst PoGپیش ماه
  • How often should i re-paste my PC?

    Dark DDark Dپیش ماه
  • 8:13 damn i jumped

    Saran SSaran Sپیش ماه
  • hello, noob here, whats the best tools to check a cpu temp?

    Shallon OgdenShallon Ogdenپیش ماه
  • "it never gets hard"...THAT'S WHAT SHE SAID......lol

    RSTV ProductionsRSTV Productionsپیش ماه
  • Why not using 1usmus clock tuner on this processor to gain more performance?

    Replic/\ntReplic/\ntپیش ماه
  • Better than Kryonauts, aye 🤔

    GholdwayneGholdwayneپیش ماه
  • Jays gonna take you back to the paste To show his shitty job that sucked ass He'd rather haaave, a vlog caaaam Take an out of focus shot of his gear He'd rather feed, magnetic screws, To a boring mat, as an eff you to Steve. He's the angriest Jay you ever heard He's the angry IFixIt nerd

    LunarAuraLunarAuraپیش ماه
  • Sounds like the battery is a backup power source so that you don't loose your progress if a cable gets yanked or the power goes out.

    PeekofwarPeekofwarپیش ماه
  • I should probably re-paste my brandnew laptop it spends its cpu time in the 70s at idle but playing a game highest temp was 96c clocks stayed in the 4600 range and my gpu highest at 75c

    Vance DavisVance Davisپیش ماه
  • Came for the diagnosis, stayed to watch Jay trigger half the internet with his paste application method.

    sheep83sheep83پیش ماه
  • JAY LERN 2 PASTE!!!

    XblackdemonxXblackdemonxپیش ماه
  • How to check the temperature?

    Ai ShimizuAi Shimizuپیش ماه
  • jay saying its good thermal paste....*checking amazon* "out of stock" fuuuuuuuck! at this point anything is out of stock

    SammieSammieپیش ماه
  • I run this rig as my daily driver only it has a 3700x, and game on it heavily. I've had it a little over 6 months, It substitutes a desktop quite nicely actually, and what you loose is well made up for in quality and versatility. That being said ive noticed the temps getting very high lately. In long game sessions it has always made its way up to 90, then it started hitting 94 and going back down. Now its pegged at 95 all the time when gaming. When browsing the web i would normally see temps around 50 and now i am at 65. When i had it built i paid for an add on to put IC diamond paste on it, I figured since i wasn't getting the 3900x i wouldn't have too much trouble with the paste. I wish i paid more for the kryonaut. Any way thank you @JayzTwoCents for confirming what i suspected. Ill be putting the same paste you put on yours. An update in 6 more months would be cool.

    shadowhawkshadowhawkپیش ماه
  • That kpx paste is like me 😭. Sorry...

    Simon NeirynckSimon Neirynckپیش ماه
  • Was this a "Jayztechtip"?, lmao, hate hate hate hate. here's your hate comment. (may need to repaste it).

    daniel hardydaniel hardyپیش ماه
  • Jay: This thing is overheating! Internet: You did this to you. 😁

    slowmocrashnburnslowmocrashnburnپیش ماه
  • No more LN2 tank interupting? sad sad day

    Ondřej JalůvkaOndřej Jalůvkaپیش ماه
  • depression.. laptop edition

    MandoMandoپیش ماه
  • damnn, so my omen 15 2018 temps are not normal on 90 to 97 degree

    Reiniel AniceteReiniel Aniceteپیش ماه
  • I miss the ifixit-explosion-thing

    Sam Van der RoostSam Van der Roostپیش ماه
  • This needs a Dell Inspiron 9100/XPS Gen 1 Chassis

    ShadowOps Airman1ShadowOps Airman1پیش ماه
  • My honest opinion is that this Origin laptop is extremely bad...

    qu0qu0پیش ماه
  • Weird I seen that icy driveway video.

    William HollingerWilliam Hollingerپیش ماه
  • Jayz after watching i did a little bit of digging and some people using KPX Paste seem to have the same problem as you. Months after applying it, the temperatures spiked and when they removed the Cooler the Paste was solid and dried out (not gooey anymore). If you have the time, could you maybe look into this matter? I think it would maybe help some people or at least make them aware of KPX drying out after months and this leading to a spike in temperature.

    PsykoPsykoپیش ماه
  • Well, I've had my thermal paste for 6 years on my 4790k. Just replaced it with the tube that I bought 6 years ago when I bought the cooler, was still runny so I thought why not? Idle dropped from 55c to 35c lol

    James MasonJames Masonپیش ماه
  • Wow! The Verge would be proud. 😎👀

    oDieseLzoDieseLzپیش ماه
  • COVID exists BTW.

    FTW TechFTW Techپیش ماه
  • Jay i have a new Lenovo ideal3 i5 10th gen. 2 months old. I run streamlabs from my elgato n ps4 pro. After 1.5 hours it freezes and i have to wait until it decides to reboot. I did a hard reset with Lenovo tech same issue. I took it to micro center they did the promising lenovo hardware test no hardware issues. Now im stuck with is 600 dollar laptop that cant run streamlabs for more than an hour on my channel. Please help me. Laptop model S/N PF2BNSLZ

    Lock N Load922Lock N Load922پیش ماه
  • hate comment ...

    Rui SilvaRui Silvaپیش ماه
  • meanwhile my 15 r3 running at 100C CPU 90C GPU without the underclocks XD...

    Teo JeoTeo Jeoپیش ماه
  • What's the point of equipping a laptop with a CPU that can't be fully utilized because there's not enough power available? Wouldn't a CPU that just barely stays inside the power limit make much more sense? It's like... driving a Ferrari on an Autobahn with no speed limit but having to stay at 150km/h because the tires you put on it would explode at faster speeds.

    SephokSephokپیش ماه
  • Problem is easy DONT BY DESKTOP HARDWARE stuffed into a laptop

    Jon AJon Aپیش ماه
  • Just make a video watercooling that thing :D

    JugadorJugadorپیش ماه
  • Another reason I don't like laptops....lol

    TheMadKeyboardTheMadKeyboardپیش ماه
  • 11 minute video on a reminder to reapply thermal paste...

    rantanplan1911rantanplan1911پیش ماه
  • @jayztwocents Intel Rocket Lake 11th Gen release is supposedly supposed to happen at the end of March. I have been trying to get my hands to get a 5000 series processor, to no avail. I did manage to get my hands on a 3090 card. Should I just wait till the 11th gen item chip is out? Others may also have this question and I would love to see a videos from your channel. Note: I also want to ask Gamers Nexus and Linus Tech Tips the same question. I love hearing all of your opinions.

    Michael AdamsMichael Adamsپیش ماه
  • "We had to investigate what was causing the cpu to run hot...." And it was you.

    exturkconnerexturkconnerپیش ماه
  • While i agree with better thermal paste and taking apart to reapply, what annoys me about your videos is that this type of move on such a pricey laptop usually voids warranty. An obnoxious warning about this for people would be nice. (it might not void warranty)but if it did and they did it on your suggestion that would be horrible right ? I cant be the only one is annoyed by that ? CHECK YOUR WARRANTY before attempting.

    JeepguyJeepguyپیش ماه
  • Do you think you could do a video about external gpus?

    Connor HenningConnor Henningپیش ماه
  • I do this on a fairly regular basis with my old laptops. I don't have any of the fancy KPX paste, but clearing the cobwebs and repasting brings back a few fps for the kids on the old gaming laptop. I've also fixed crashing laptops the same way (pre-thermal throttling systems.) Remember, dust bunnies aren't cute, and don't make for good Hassenpfeffer.

    kstriclkstriclپیش ماه
  • Anyone else think that Jay looks like this shmuck? irworld.info/show/fy-lm-h-y/nKB7i5mfi6Ojsq4.html

    Question AskerQuestion Askerپیش ماه
  • can u add up a link of that thermalpaste? - seems like i cant find the Kingpin KPx ;(

    Levin BittnerLevin Bittnerپیش ماه
  • SUGGESTION: I'm having thermal issues with my xfx 580 8gig gpu and was looking to water cool it. But I haven't found any videos talking about doing this. Considering its popularity, could you make a video about cooling options for this card please?

    GrusDarkhartGrusDarkhartپیش ماه
  • Jay's tagline for this one should be "But I die-regress..."

    spotted0wlspotted0wlپیش ماه
  • I re-pasted my work HP this last fall and it made a huge difference too. Nice troubleshooting on a easy fix.

    Jeremy BarberJeremy Barberپیش ماه
  • Noob

    BaselBaselپیش ماه
  • Is it just me or is this an old video? I swear I've seen this video before...

    John LinkletterJohn Linkletterپیش ماه
  • if you have to absolutely 100%have to run from the brick...whats the point of this laptop?

    Paul LeggettPaul Leggettپیش ماه
  • Hate comment

    Chuck NorresChuck Norresپیش ماه
  • On inspection of that thermal compound based on what I can see in this video: You used too much. Eventually the oils of the thermal compound will disperse and coat surrounding surfaces, and in a heated environment will slowly evaporate. This leaving behind a cakey ultra-fine powder that clings to itself and surfaces like wet sand, but it's actually dry. Matching up the separation lines from the CPU to the coldplate, I can see some small gaps where I'm willing to bet air got trapped in the application. This would accelerate the oxidation process of the thermal compound drying it out faster. Heating would cause the air pockets to expand creating a more sponge-like structure within the thermal compound. This, once the oils have dispersed due to oxidation, would create an insulating barrier instead of thermal transfer. How can I tell? Three ways. First, there are numerous pits all throughout the main blob of TIM on the CPU. Second, if this process hadn't happened as described then the TIM would've held onto the coldplate via suction force. Third, you can't even see the labeling of the CPU heatspreader through that thick mass of TIM. Solution? Pea-sized ball in the center of the CPU, and about a half pea-sized ball on the GPU. Press the heatsink firmly on the surface and oscillate pressure while trying to smear the TIM over the surface with the coldplate. Not sure it got full coverage? I assure you it did if your technique was correct, but to be sure you can pull the heatsink off and check the application. First, ensure you covered edge-to-edge spread on both the CPU and GPU. Second, ensure you can still see the majority of the CPU labeling. If not, you used too much or your chosen TIM is shit. Third, clean surfaces and repeat with confidence.

    Xion EternumXion Eternumپیش ماه
  • Hey Jay, try out Manual OC with ZenStates or CTR to bring the 3950X inside this laptop to around 3.6GHz at 0.975V to reach roughly 88W PPT in CineBench r20. You will LOVE the results. It should reach 8400 points in CB20. This way it will run way cooler with quieter fans and the performance is noticeable better than stock. At least for highly multithreaded loads. You can find a video on my channel in which I compare the scores achievable stock and tuned with all the CPU options for this notebook. But beware, if you use ManualOC you have to deactivate the ControlCenter software in Windows' services, it's called "Control Center Hotkey Service". Otherwise the ControlCenter overwrites the manual OC from time to time.

    3DAndStuff3DAndStuffپیش ماه
  • when I play gta 5 on my AMD Rx 480 i only draw 50 watts max which results in low fps any tips? ( i have a 450 watt psu BTW)

    therealilxaidentherealilxaidenپیش ماه
  • Let's just say, temperatures'd Ryzen overtime.

    Alvaro Gala GonzalezAlvaro Gala Gonzalezپیش ماه
  • cheap brand=poor paste job ahh i feel good feeling cooler cpu says lol

    David WyckoffDavid Wyckoffپیش ماه
  • Well, to be fair your new thermal paste application isn't stellar either, honestly, what the fuck is that? How hard is it just making an X?

    The FirehawkThe Firehawkپیش ماه
  • I've been having terrible luck with Kryonaut. I have an NZXT X73, and after repasting from NZXT's stock to Kryonaut, I can now hear the fan a LOT more and temps under load raised by 10C, suspecting I bought fake Kryonaut, but I can't say for sure as I have bought it a couple times and it has always been the same experience. Can anyone who has had good experiences with Kryonaut and KPX tell me which they've seen get better temps?

    Dylan WilsonDylan Wilsonپیش ماه
  • He fixed it without ifixit. Lizard people confirmed.

    EnnovativeEnnovativeپیش ماه
  • So it wasn't a fault of the manufacturer after all. Nice investigation. You found the one responisble. Caught on video too. Now you have to bring the responsible person(s) to justice.

    SysGhostSysGhostپیش ماه
  • So thats why my laptop sounds like a helicopter trying to take off

    FUS1ONFUS1ONپیش ماه
  • Wait... No explosions?!

    Dingo DashDingo Dashپیش ماه
  • hate comment

    YoyoYoyoپیش ماه
  • Idk why my laptop (Zenbook 14) temps are so high. Before when I played games it would reach 70* now it reaches 85*+ on the reg. The weirdest thing is that when I exited out almost all programs except my tablet’s driver, then close the lid, it still RISES IN TEMPERATURE. Couple hours later when I open it it’s is 85*+ even when it is below idle conditions! I don’t really know why this is happening. I have also came to the same conclusion as Jay but don’t have the technical prowess nor the tools and thermal paste to do it. Edit: If you suspect blocked airflow, it isn’t, I elevate the laptop giving vents ample airflow, also it can’t be a buildup of dust cause I only have used this laptop for around 5 months. Also I’m pretty sure it isn’t a virus cause I use common sense and don’t download sketchy stuff off the internet, and if the off chance I do download a software I don’t know, I search it up and if it’s safe I scan it through virustotal for reassurance.

    Circle PersonCircle Personپیش ماه
  • If that's how Jay applies thermal paste, one can only imagine how he applies glue to his model ships. Oof!.

    DJJOOLZDEDJJOOLZDEپیش ماه
  • good job Jay

    Criminal MindzCriminal Mindzپیش ماه
  • Hey love your videos. Can you do a video on the laptop I just got which is the asus rog zephyrus G14. When I play games the fans ramp up hard and the laptop gets really toasty but it never crashes so far but I did get it less than a week ago

    jarrett sharpjarrett sharpپیش ماه
  • I used toothpaste n it's still working on 8700 cpu

    Code Zero GroupCode Zero Groupپیش ماه
  • I'm done with IRworld too many ads

    Code Zero GroupCode Zero Groupپیش ماه
  • I have the same one, gets to 90/95c when gaming, and i have liquid metal on it, how the f doest that happen, both fans work and are trying to takeoff anyone got an idea? Perhaps liquid metal is to thin for it and thick pack of normal paste would work better?

    Danny hDanny hپیش ماه
  • My 6 yr old I7-4710MQ goes up to 98 degrees C. Is that bad?

    GuilefpvGuilefpvپیش ماه
  • was here

    Video NomadVideo Nomadپیش ماه
  • Love these video's from you Jay, the honesty from you is exactly what I need to see and hear in your video's, I must have watched nearly all of your video's. Your how too video's have pulled me out of the crap several times. Many thanks my friend keep up the much appreciated hard work

    alan tidswellalan tidswellپیش ماه
  • So... Should I repaste my laptop? I have noticed a significant decrease in performance..

    GamebudymassGamebudymassپیش ماه
  • You should undervolt it too!

    SkillisForNoobsSkillisForNoobsپیش ماه
IRworld